A9415280882 - Intake hose, hose OE number by MERCEDES-BENZ
Product Details
This intake hose with OE number A9415280882 is an essential rubber component for the air intake system of Mercedes-Benz heavy trucks. It connects the air filter to the engine intake port, delivering clean air, absorbing vibration deformation generated by engine operation and preventing air leakage. Unlike load-bearing chassis parts such as torque rods and control arms, this hose directly affects the engine air-fuel ratio. If damaged or leaking, it will lead to power loss, higher fuel consumption and dust ingress that causes premature engine wear. Made of ageing-resistant EPDM rubber by one-piece molding with corrugated flexible section, it adapts to engine displacement and shaking. The sealing lip is molded strictly following original curvature for reliable sealing. It is widely used on long-haul tractors, mixer trucks and dump trucks. It is easy to install and a great replacement option for fleet maintenance and engine overhaul, effectively protecting the turbocharger and engine cylinder block.
| Item | Specification |
|---|---|
| OE No. | A9415280882 (9415280882) |
| Product Name | Intake Hose / Air Filter Hose |
| Main Material | EPDM rubber + Reinforced fiber layer |
| Mounting Position | Between air filter and engine intake port |
| Structure | Corrugated flexible design, integrated sealing lip |
| Temperature Resistance | -40℃ ~ +120℃ |
■ Fiber reinforced inner layer, anti-stretch, resistant to bulging and collapse under high negative pressure; ■ Premium EPDM rubber, oil and ozone resistant, not easy to harden or crack under long-term sunlight exposure; ■ Corrugated flexible section absorbs engine vibration and offset to reduce joint loosening and air leakage; ■ One-piece molded sealing end ensures tight fit, good sealing effect with simple clamp installation; ■ Stable air intake flow, blocks unfiltered sand and dust, extends engine service life.
Mercedes-Benz Actros MP2, MP3 heavy trucks, chassis code 941. Suitable for 6×4 tractors, dump trucks and cement mixer trucks.
① Q: What engine problems will intake hose leakage cause?
A: Unfiltered dust enters the cylinder, causing wear on cylinder liners and pistons. Common symptoms include weak power, higher fuel consumption and rough idle.
② Q: Can I replace this hose separately, or do I need to change the whole air filter assembly?
A: It can be replaced separately. If the air filter housing is intact, just replace the old hose to save repair cost.
③ Q: Can I keep driving for a short time if the corrugated part cracks?
A: Not recommended. Cracks will cause continuous air leakage and may lead to costly premature engine damage. ④ Q: Is sealant required during installation?
A: The built-in sealing lip works well with properly tightened clamps. Sealant is only optional for aged joints.
⑤ Q: Is this hose durable for dusty construction sites?
A: Yes. The rubber is weatherproof and tear-resistant. The corrugated design absorbs vibration, delivering stable performance under dusty heavy-duty conditions with regular inspection.
-
A0004707905 - Sealing cap, cap OE number by MERCEDES-BENZ
A0004707905 Mercedes-Benz Fuel Filler Cap / Sealing Cap 1.Product Introduction This locked fuel filler cap with OE number A0004707905 is a sealing protective part for Mercedes-Benz heavy truck fuel tanks. Its function is totally different from chassis mounts and intake hoses. It is fitted at the ... -
A6202400317 - Engine mounting, mounting OE number by MERCEDES-BENZ
Product Title: A6202400317 Mercedes-Benz Engine Mounting 1.Product Introduction This engine mounting with OE number A6202400317 is a vibration-isolating suspension part for Mercedes-Benz commercial trucks. It is installed between the frame and engine, with a completely different function from intake ... -
A9415280882 - Intake hose, hose OE number by MERCEDES-BENZ
1. Product Title: A9415280882 Mercedes-Benz Intake Hose Product Introduction This intake hose with OE number A9415280882 is an essential rubber component for the air intake system of Mercedes-Benz heavy trucks. It connects the air filter to the engine intake port, delivering clean air, absorbing ... -
9483502705 - Track control arm, control/trailing arm OE number by MERCEDES-BENZ
9483502705 Mercedes-Benz Track Control Arm / Trailing Arm 1.Product Introduction This track control arm (trailing arm) with OE number 9483502705 is a key load-bearing component for the chassis suspension of Mercedes-Benz heavy-duty trucks. It differs functionally from V-stay torque rods. It mainly ...
